• Battery types : 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO₄
• Adaptive Charging Technology (APTOTM) - automatically works out what type and size of battery you’ve got and what it needs, then delivers a customised charging programme with the most appropriate charge
• Polarity Free Clamps - just put one clamp on each charging point and the CS ONE will automatically work out which is the positive and which is the negative terminal
• Bad cell detection - the CS ONE can tell if your battery can’t be charged – and will notify you

• VALUE PACK include MXS5.0 Battery Charger (RM680) + Confort Indicator (RM65) pack in a Premium Carry Bag
• All in 1 packaging
• VALUE PACK is limited (while stock last)

• Works with all types of 12V lead acid and lithium batteries
• Suitable for use on motorbikes, cars, leisure vehicles and vans
• Countdown function shows you how long there is left before your battery is fully charged
• Can be left safely connected for smart maintenance charging
• Can be charged and used with 12V accessory socket, service battery or solar panel
• USB-C and USB-A outputs for charging tech like laptops, smartphones and tablets
• Easy to use, easy to operate, easy to understand
• No modes to select – just connect and the CS FREE will do the rest
• Complete range of accessories available for mains free charging and handy storage
• New ergonomic design with a tough and durable case.
• Easy to carry around or wall mount using the optional CS Wall Mount
• 2 year ‘peace of mind’ warranty

• Battery separation replacing diodes and VSR relays
• Battery types : 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO₄
• Selectable AGM option – 14.4V or 14.7V
• Maximised charging for better battery life and performance
• Temperature sensor to compensate for hot or cold conditions
• Splash and dust proof (IP65)
• Compatible with SMARTPASS 120, SMARTPASS 120S for the ultimate 140A power management solution
• Battery capacity : 40 ~ 300Ah
• 2-year warranty

• The PRO25SE comes with 6m cables, wall hanger and bracket
• Mounting points within the casing for permanent installation on ramp posts or in work bays
• Compatible with batteries from 40Ah to 500Ah (30Ah to 450Ah Lithium*).
• SUPPLY mode to support the battery during diagnostic or fault-finding work.
• Dedicated Lithium* mode
• Integrated safety features, so it’s safe for the battery & the vehicle.
• Built-in temperature sensor to achieve maximum charge levels
• Fully automatic and easy to use. Simple to connect, spark proof and reverse-polarity protected.
• Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries.
• IP44 classified for outdoor use
• Lightweight & highly portable
• Tough & robust
• 2 year warranty

• Wiring harness, battery charger accessory
• 6.3mm (M6) ring terminals for top post batteries
• 17 in. Length, each
• Watertight
• Satisfy all the battery charging needs without any hassle
• 2 years warranty

• Helps protect your CTEK charger from bumps and scratches. Gives extra grip on slippery surfaces.
• Made of durable silicon rubber material.
• The CTEK BUMPER fits snugly arount the body of your CTEK charger.
• Suitable for CTEK XS0.8
• 2-year warranty.

• Open frame design allows easy access to charger functions
• Suitable for all CTEK chargers 3.8-5.0 a
• Long lasting and durable
• 2 years warranty

• Helps protect your CTEK charger from bumps and scratches. Gives extra grip on slippery surfaces.
• Made of durable silicon rubber material.
• The CTEK BUMPER fits snugly arount the body of your CTEK charger.
• Suitable for CTEK PRO25S
• 2-year warranty.

• Helps protect your CTEK charger from bumps and scratches. Gives extra grip on slippery surfaces.
• Made of durable silicon rubber material.
• The CTEK BUMPER fits snugly arount the body of your CTEK charger.
• Suitable for CTEK MXS10
• 2-year warranty.

• VALUE PACK include MXS5.0 Battery Charger (RM530)+ Bumper 60 (RM65) + Confort Indicator (RM55) + FREE CTEK 5000mAH Power Bank
• All in 1 packaging
• VALUE PACK is limited (while stock last)

• Charges 24V batteries from 28-300Ah
• Recond program
• Temperature sensor to compensate for cold conditions
• Can be used as a 24V power source
• IP44 classified for outdoor use
• Fully automatic ‘connect and forget’ 8 step charging
• Patented maintenance charging up to 500Ah
• Easy to read LED display
• Safe spark free operation
• Reverse polarity protected
• Short circuit proof
• 2-year warranty

• Charges 24V batteries from 8-100Ah
• Patented maintenance charge for longer battery life
• Recond program
• Comes with Connect – Eyelet and Connect – Clamp connectors
• Splash and dust proof (IP65)
• Fully automatic ‘connect and forget’ 8 step charging
• Can be used as a power source
• Easy to read LED display
• Safe spark free operation
• Reverse polarity protected
• Short circuit proof
• 2-year warranty

• Suit for Motorcycle battery
• Charges 6V batteries from 1.2-100Ah
• Fully automatic ‘connect and forget’ 4 step charging
• Patented desulphation function
• Comes with Connect – Eyelet connectors and Connect - Clamp connectors
• 5-year warranty

• 55cm cable length
• Comes in two sizes to fit different battery terminals perfectly
• 15A fuse
• Splash and dust proof (IP65)

• Universal model fits both 12mm and 21mm sockets
• 50mm cable length
• Light indicator to check charging status
• Compatible with all 12V CTEK CONNECT chargers

• Comes in two cable lengths with M8 8.4mm eyelet terminals
• 150cm cable length (part no. 56-380)
• 330cm cable length (part no. 56-531)
• Size of connector/indicator: 5mm x 21mm x 50mm
• 15A fuse

• Easy to install
• Comes standard with an end cap attached to ensure the connection stays in good condition while not in use
• Convenient way to connect from a standard style O.E., SAE or aftermarket pigtail lead to your CTEK products
• Easy to read display

• 2.5m cable length to give your charger more range
• CTEK CONNECT system for a secure connection
• Suitable for use with all CTEK chargers up to 10A using the CONNECT system
• Splash and dust proof (IP65)
• 2 years warranty

• Wiring harness, battery charger accessory
• 8.4mm (M8) ring terminals for top post batteries
• 17 in. Length, each
• Watertight
• Satisfy all the battery charging needs without any hassle
• 2 years warranty

• CTEK- Charger 12V, 5A 600mAh 3V LiFePo4
• 5 amp output special 8-Stage Lithium Ladeprogramm
• 5 amp output special 8-Stage Lithium Ladeprogramm Perfect and Charge retention charge of 600mAh 3V LiFePo4 Batteries charge over 8-stage LED display, visible Protects vehicles'electronics splash-proof and dust-proof (IP 65)
• 5 years warranty

• Compatible with batteries from 40Ah to 500Ah (30Ah to 450Ah lithium [12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)]
• Fully automatic and easy to use. Simple to connect, spark proof and reverse-polarity protected.
• Integrated safety features, so it’s safe for the battery & the vehicle.
• Built-in temperature sensor to achieve maximum charge levels
• Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries.
• IP44 classified for outdoor use,Lightweight & highly portable
• Tough & robust
• 2 years warranty

• Designed to protect both the charger and the paint
• Made of high-quality silicon rubber
• Fits for MXS3.8 , MXS5.0 , MXS5.0 Time to G o

​

• Simple "traffic light" system  to show the state of charge of your battery. 
• Practical for those batteries that are difficult to access. 
• Cable length 500 mm.

• 2 year warranty
• For all types of 12V batteries, including Lithium (LiFeP04)
• Unique ‘Adaptive’ Charging Mode (Pat. Pending)
• Stable power supply with variable voltage selection
• High operating efficiency with fan-less cooling
• Safe and easy to use

• Compatible with all battery technologies, including Lithium lifePO4
• Variable 12.6 to 14.8v power supply voltageselection
• 120A power supply feature
• Simple to use
• Large LCD display screen
• Built in temperature compensation for optimum charging
• Multi-step charging process

• Specially designed for new generation Start/Stop vehicles
• Maximizes battery Life for vehicles with stop/start technology & a stop/start replacement battery is up to 50% more costly than its traditional equivalent
• Fully automatic -connect and forget
• 12v AGM and EFB lead-acid batteries
• 5 year warranty

• Charges batteries from 20Ah up to 200Ah. Maintains larger batteries up to 300Ah
• Recond mode - special programme to revive deeply discharged batteries
• Supply mode - can be used as a 12V power source to protect electrical settings
• Detachable temperature sensor
• 2 year warranty

• Charges batteries up to 110 Ah. Maintains larger batteries up to160 Ah.
• Unique 8 step charging.
• Temperature sensor.
• AGM program.
• 8 charging programs/program alternatives.​

• Easy to understand: Countdown display to tell you when the battery is charged and ready to go
• Simple to connect and easy to use: Fully automatic, spark free, reverse polarity protected
• Tough and reliable: Designed for outdoor use in even the most extreme temperatures. Developed and tested in Sweden
• Flexible: Compatible with many different types of lead-acid vehicle batteries
• Effective: Restores battery life and reconditions flat batteries. Maintains: Ideal for carefree long-term maintenance charging​

• Easy to use simply attach to battery, no need to disconnect, and follow the on screen instructions
• It tests the battery in seconds providing an instant on screen result which advises what action should be taken
• The patented technology used is safe for the user and vehicle electronics
• It is reverse polarity protected, creates no battery loads, heat or sparks
• Works equally well with all lead-acid battery types and requires no adjustment to perform an accurate test

• Suitable for all car, motorcycle and engine starter batteries 4.5AH or over
• Compatible with Android OS 4.4 and higher, iPhone iOS 7 and higher, Bluetooth® 4.0
• Sensor hardware is compatible with all 12-volt lead-acid vehicle batteries
• App is customizable and allows user to monitor multiple vehicles
• Each vehicle in the app is identificed by name and photo
• App plots the state of charge history and sends notifications if state of charge falls below 58%, or if the sensor has not updated the app for more than a week
• Easy to understand smart phone application and monitor
• Push notification straight to your mobile phone if your charge falls to a critical level
• Can sync with multiple monitors

• Safe and simple to use with outstanding results on all battery types
• Intelligent chargers that react to the battery condition to maximise charge and extend life – by up to 3 times
• OE Quality. CTEK chargers are robust and reliable and come with a 5 Year Warranty.

• MXS 3.8 is an advanced microprocessor controlled battery charger with patented Float/Pulse maintenance for use on batteries from 1.2Ah up to 85Ah
• MXS 3.8 ideal for long-term maintenance.
• MXS 3.8 is a fully automatic ‘connect and forget’ 12V charger with 7 charging steps and offers selectable 0.8A, and 3.8A programes.
• MXS 3.8 is easy and safe to use, protects vehicle electronics, is spark-free, reverse polarity protected and short circuit proof. 

• Specially Designed For Maintenance Charging of Powersport Batteries
• Enable Charging on Vehicles Using CANBUS Technology
• Provides the exact charge required by your battery- a long and healthy battery life
• Optimises performance of your powersport battery
• Comes with a 5 year warranty.